Test Mode - Printek FORMSMASTER 8000SE Operator's Manual

P R I N T E R
Print the Menus
Possible Values: No*, Current Values
This item may be used to print the entire list of current values.
Current Values
configuration and their current values. This provides a means of record
keeping or "backup", so that the values can be checked and restored in
case an operator inadvertently changes one.
After setting this value, press ONLINE to begin printing. After printing is
completed, the value of this item will automatically return to No. Note that
once printing begins, taking the printer off line for any reason ( ONLINE
button pressed, ribbon lid or paper door opened, or a paper fault) will
cause printing to be aborted.

Test Mode

Possible Values: Off*, Barber Pole,
When this item is set to Barber Pole, the printer will print a rotating
character pattern. Printing may be started and stopped with the ONLINE
button.
When set to Hex Dump, the printer will print all received data in a special
debug format which may be used by programmers to solve software
problems. For more information, refer to the Hex Dump section of the
FormsMaster 8000se series Programmer's Manual.
70
C O N F I G U R A T I O N
will print only the items relevant to the current printer
Hex Dump, Demos
Print the
Menus
No
Test Mode
Off