Load Sharing - Brocade Communications Systems ICX 7250 Series Configuration Manual

Load sharing

FIGURE 22 Redistributing OSPF and static routes to RIP routes
Load sharing
Brocade devices can load share among up to eight equal-cost IP routes to a destination. By default, IP load sharing is enabled. The
default is 4 equal-cost paths but you can specify from 2 to 8 paths.
On the ICX 7750 device, the value range for the maximum number of load-sharing paths is from 2 through 32 ,which is controlled by
the system-max max-ecmp command.
The device software can use the route information it learns through OSPF to determine the paths and costs.
Brocade FastIron Layer 3 Routing Configuration Guide
230 53-1003903-04