Displaying Ripng Routing Table - Brocade Communications Systems ICX 7250 Series Configuration Manual

TABLE 45 show ipv6 rip output descriptions (continued)
Field
Split horizon/poison reverse
Default routes
Periodic updates/trigger updates
Distribution lists
Redistribution

Displaying RIPng routing table

To display the RIPng routing table, enter the following command at any CLI level.
device# show ipv6 rip route
IPv6 RIP Routing Table - 4 entries:
ada::1:1:1:2/128, from fe80::224:38ff:fe8f:3000, e 1/3/4
RIP, metric 2, tag 0, timers: aging 17
2001:db8::/64, from fe80::224:38ff:fe8f:3000, e 1/3/4
RIP, metric 3, tag 0, timers: aging 17
bebe::1:1:1:4/128, from ::, null
CONNECTED, metric 1, tag 0, timers: none
cccc::1:1:1:3/128, from fe80::768e:f8ff:fe94:2da, e 2/1/23
RIP, metric 2, tag 0, timers: aging 50
Syntax: show ipv6 rip route [ ipv6-prefix/prefix-length | ipv6-address ]
The ipv6-prefix/prefix-length parameters restrict the display to the entries for the specified IPv6 prefix. You must specify the ipv6-prefix
parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373. You must specify the prefix-length
parameter as a decimal value. A slash mark (/) must follow the ipv6-prefix parameter and precede the prefix-length parameter.
The ipv6-address parameter restricts the display to the entries for the specified IPv6 address. You must specify this parameter in
hexadecimal using 16-bit values between colons as documented in RFC 2373.
TABLE 46 show ipv6 rip route output descriptions
Field
IPv6 RIP Routing Table entries
ipv6-prefix /prefix-length
ipv6-address
Next-hop router
Interface
Source of route
Brocade FastIron Layer 3 Routing Configuration Guide
53-1003903-04
Description
The status of the RIPng split horizon and poison reverse features. Possible
status is "on" or "off."
The status of RIPng default routes.
The number of periodic updates and triggered updates sent by the RIPng
Brocade device.
The inbound and outbound distribution lists applied to RIPng.
The types of IPv6 routes redistributed into RIPng. The types can include
the following:
•
•
•
•
(0)
Description
The total number of entries in the RIPng routing table.
The IPv6 prefix and prefix length.
The IPv6 address.
The next-hop router for this Brocade device. If :: appears, the route is
originated locally.
The interface name. If "null" appears, the interface is originated locally.
The source of the route information. The source can be one of the
following:
•
•
STATIC - IPv6 static routes are redistributed into RIPng.
CONNECTED - Directly connected IPv6 networks are
redistributed into RIPng.
BGP - BGP4+ routes are redistributed into RIPng.
OSPF - OSPFv3 routes are redistributed into RIPng.
RIP - routes learned by RIPng.
CONNECTED - IPv6 routes redistributed from directly
connected networks.
Displaying RIPng information
209