Brocade Communications Systems ICX 7250 Series Configuration Manual page 120

Displaying IP configuration information and statistics
This display shows the following information.
TABLE 20 CLI display of global IP configuration information - Layer 2 switch
Field
IP configuration
Switch IP address
Subnet mask
Default router address
Most recent TFTP access
TFTP server address
Configuration filename
Image filename
Displaying ARP entries
To display the entries the Layer 2 switch has placed in its ARP cache, enter the show arp command from any level of the CLI. This
command shows the total number of ARPs for the default VRF instance.
NOTE
To display the ARP maximum capacity for your device, enter the show default values command.
device# show arp
Total Arp Entries : 1
No.
1 IP
192.168.1.170
Syntax: show arp
TABLE 21 CLI display of ARP cache
Syntax: show arp
Field
Total ARP Entries
IP
Mac
Port
Age
VlanId
120
Mac Port Age
0000.0011.d042 7
Description
The management IP address configured on the Layer 2 switch. Specify
this address for Telnet access or Web management access.
The subnet mask for the management IP address.
The address of the default gateway, if you specified one.
The IP address of the most-recently contacted TFTP server, if the switch
has contacted a TFTP server since the last time the software was reloaded
or the switch was rebooted.
The name under which the Layer 2 switch startup-config file was
uploaded or downloaded during the most recent TFTP access.
The name of the Layer 2 switch flash image (system software file) that was
uploaded or downloaded during the most recent TFTP access.
VlanId
0 1
Description
The number of entries in the ARP cache.
The IP address of the device.
The MAC address of the device.
NOTE
If the MAC address is all zeros, the entry is for the default
gateway, but the Layer 2 switch does not have a link to the
gateway.
The port on which the entry was learned.
The number of minutes the entry has remained unused. If this value
reaches the ARP aging period, the entry is removed from the cache.
The VLAN the port that learned the entry is in.
Brocade FastIron Layer 3 Routing Configuration Guide
53-1003903-04