Creating Interface Parameters - Alcatel-Lucent 7210 SAS T Configuration Manual

Creating Interface Parameters

If you have multiple subnets configured on an Ethernet interface, you can configure VRRP
on each subnet.
The following displays an IP interface configuration example:
A:SR1>config>router# info
#------------------------------------------
echo "IP Configuration "
#------------------------------------------
#------------------------------------------
A:SR1>config>router#
7210 SAS M, T, X, R6, R12, Mxp OS Router Configuration Guide
interface "system"
address 10.10.0.1/32
exit
interface "testA"
address 123.123.123.123/24
exit
interface "testB"
address 10.10.14.1/24
exit
router-id 10.10.0.1
VRRP
Page 175