Alcatel-Lucent 7210 SAS T Configuration Manual page 216

7210 sas series service access switch
Hide thumbs Also See for 7210 SAS T:
Table of Contents

Advertisement

Priority Policy Host Unreachable Event Commands
The hold-set timer be expired and the historical success rate must be met prior to the event
operational state becoming cleared.
The no form of the command deletes the specific IP host monitoring event. The event may be deleted
at anytime. When the event is deleted, the in-use priority of all associated virtual router instances
must be reevaluated. The event's hold-set timer has no effect on the removal procedure.
Default
no host-unreachable — No host unreachable priority events are created.
Parameters
ip-addr — The IP address of the host for which the specific event will monitor connectivity. The ip-
interval
Syntax
interval seconds
no interval
Context
config>vrrp vrrp-policy-id>priority-event>host-unreachable ip-addr
Description
This command configures the number of seconds between host unreachable priority event ICMP
echo request messages directed to the host IP address.
The no form of the command reverts to the default value.
Default
1
Parameters
seconds — The number of seconds between the ICMP echo request messages sent to the host IP
Page 216
addr can only be monitored by a single event in this policy. The IP address can be monitored by
multiple VRRP priority control policies. The IP address can be used in one or multiple ping
requests. Each VRRP priority control host-unreachable and ping destined to the same ip-addr
is uniquely identified on a per message basis. Each session originates a unique identifier value
for the ICMP echo request messages it generates. This allows received ICMP echo reply
messages to be directed to the appropriate sending application.
Values
ipv4-address :
ipv6-address :
Note that the link-local IPv6 address must have an interface name specified. The global IPv6
address must not have an interface name specified.
address for the host unreachable priority event.
Values
1 — 60
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:
[0..FFFF]H
interface: 32 chars maximum, mandatory for link local addresses

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas m7210 sas r67210 sas mxp os7210 sas x7210 sas r12

Table of Contents