–
Out-of-Band Mgmt Port
To select the com port user would like to set for having console redirection
feature.
–
Terminal Type
Set as "VT100", "VT100+", "VT-UTF8", or "ANSI". "VT-UTF8" is the default
setting.
–
Bits Per Second
To select serial port transmission. Speed must be matched on the other side.
It can be set as "9600", "19200", "57600", or "115200". "115200" is the
default setting.
–
Flow Control
Flow control can prevent data loss from buffer overflow. It can be set as
"None",
"Hardware RTS/CTS", or "Software Xon/Xoff". "None" is the default setting.
–
Data Bits
–
Parity
–
Stop Bits
3.2.2.8
PCI Subsystem Settings
Above 4G Decoding
"Enable or disable" 64-bit capability. Devices to be decoded in above 4G
address space (Only if system supports 64-bit PCI decoding).
Note!
Some graphic or GPU cards need to enable 4G Decoding.
43
ASMB-925 User Manual