Menu Description - HIKVISION DS-2CE16H5T-AIT3ZE User Manual

Figure 2-12 Drill Template of the Junction Box
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Refer to step 3 of 2.2.1 Ceiling Mounting without
Junction Box to take out the camera's main body.
4. Take apart the junction box, and align the screw
holes of the camera with those on the junction
box's cover.
5. Fix the camera's mounting base on the junction
box's cover with three PM4 × 10 screws.
Figure 2-13 Secure Screws on Junction Box's Cover
6. Secure the junction box's body on the ceiling with
four PA4 × 25 screws.
Figure 2-14 Secure the Junction Box's Body on Wall
7. Combine the junction box cover with its body by
tightening four screws on junction box's cover.
8. Repeat steps 5 to 9 of 2.2.1 Ceiling Mounting
without Junction Box to complete the installation.

3 Menu Description

Purpose:
Call the menu by clicking the button
Control interface, or call preset No.95.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
Figure 2-15 Fix the Junction Box
Junction
Box Body
/Ceiling
on the PTZ