Product Features - HIKVISION DS-2CE16H5T-AIT3ZE User Manual

1 Introduction

1.1 Product Features

The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor

Low illumination, 0.008 Lux @ (F1.2, AGC ON), 0 Lux

with IR
IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

PoC (with -E)

3-axis adjustment

Overview
1.2
1.2.1 Overview of Type I Camera
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Enclosure
Mounting
Base
Clip Plate
Figure 1-2 Overview of Type II Camera
2 Installation
Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid the damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion bolts before

installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact

your dealer or the nearest service center. Do NOT
Mounting Base
Sun Shield
Lens
Model I Cables
Model II Cables
Camera
Menu
Button
Power Cord
24 VAC/12 VDC
Video Cable
Power Cord
12 VDC
Video Cable
Power Cord
12 VDC
Video Cable