Front Mudguard - Gilera 633721 Workshop Manual

Chassis

Front mudguard

- Remove the 4 retaining screws and pull the mud-
guard towards the front of the scooter.
- Pay attention during assembly to the correct po-
sitioning of the retaining straps of the hoses.
Radiator fan
- Remove the spoiler.
- Remove the front fork.
- Remove the plate supporting bracket for the horn
and voltage regulator by loosening the two fixing
screws shown in the figure in order to release the
two lower retainers of the wheel housing.
- Remove the upper fixing screw of the wheel
housing to permit movement.
- Prepare a container to collect the coolant.
- Remove the feed and return hoses from the ex-
pansion tank.
- Remove the coolant feed and return hoses from
the radiator.
- Remove the retaining screws of the radiator to
the frame shown in the figure.
- Disengage the complete radiator and the electric
fan.
CHAS - 354
Nexus 500 euro 3