Gilera 633721 Workshop Manual page 353

Nexus 500 euro 3
- Remove the central chassis cover.
- Remove the lower cover.
- Remove the fuel tank cap.
- Remove the two upper tank retainers shown in
the figure.
- Remove the fuel pump retainers.
N.B.
PAY PARTICULAR ATTENTION WHEN UNSCREWING THE FUEL PIPES AS EXCESSIVE FORCE
COULD DAMAGE THE PLASTIC INSERTS ON THE PUMP BODY. IT IS NECESSARY, HOWEVER,
DURING REMOVAL TO PRESS LIGHTLY ONTO THE LINES AND TO PUSH THE CROWN TO-
WARDS THE PUMP, AND THEN TO MAINTAIN PRESSURE ON THE CROWN AND TO PULL THE
LINES UPWARDS.
- Remove the plate supporting bracket for the horn
and voltage regulator by loosening the two retain-
ing screws shown in the figure in order to release
the two lower retainers of the wheel housing.
- Remove the tank through the front lower part of the scooter.
- For reassembly, perform the previous operations in the reverse order.
Rear central cover
- Raise the saddle.
- Remove the two fixing screws shown in the fig-
ure.
Chassis
CHAS - 353