Gilera 633721 Workshop Manual page 77

Nexus 500 euro 3
Electrical system
2. Turn the key to ON, press the button on the remote control, release the button, turn the key back to
OFF from the ON position, all within four seconds.
3. Wait 1 to 8 seconds
4. Repeat steps 2 and 3 for 4 times without removing the key. The control unit confirms the programming
has been successful by opening the saddle.
N.B.
THE CONTROL UNIT CAN PROGRAMME UP TO 7 REMOTE CONTROLS.
ELE SYS - 77