Display - ABB REU 610 Operator's Manual

REU 610 REU 610
4.1.3.
4.1.3.1.
16
Voltage Protection Relay
Operator's Manual
Left Up Down
Fig. 4.1.2.-1 Navigation push buttons
Use the navigation buttons to view, select and edit the wanted menu items.
Activate the main menu by pressing an arrow button.
*
Move between the menu levels and menu items by using the arrow buttons.
*
Select the item to be edited or store a new value by pressing
*
Increase or decrease the activated digit, shift the activated decimal point, or
*
navigate between options by using
Cancel and return the display to the previous mode (view mode or idle mode), by
*
pressing
Table 4.1.2.-1 Button navigation and editing
Wanted step or operation
Step downward in the main menu or a submenu
Step upward in the main menu or a submenu
Entering a submenu from the main menu or a higher submenu
Leaving a submenu for the main menu or a higher submenu
Increasing a value in the setting mode
Decreasing a value in the setting mode
Moving the cursor in the setting mode
Selecting the front connection at power up
Entering or leaving the setting mode, storing a new value
Entering the monitoring state
Adjusting the display contrast
Resetting or canceling, leaving the setting mode without storing a
new value
Resetting latched output contacts in the idle mode
Acknowledging and resetting indications, latched output contacts and
memorized values

Display

Display test at power up
When connecting the auxiliary voltage to the relay:
Right Enter Clear/ Clear/
Cancel Cancel
and .
1MRS755770
A040225
.
Push button
or
and
and
and or
for 5 s
and