REU 610
REU 610
Main Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
Fig. 4.2.1.4.-1
INFO menu group
1) Relay serial number
2) CPU module software number and revision
3) CPU module serial number
4) CPU module software build number
5) Communication module software number and revision
6) Communication module serial number
7) Communication module protocol name
8) Communication module software build number
4.2.2.
4.2.2.1.
30
Voltage Protection Relay
Operator's Manual
While in the DNP serial number view, press
5. To return the display to the idle mode, press
1
INFO
REU 610
xxxxxxxx
YYYYMMDD
CPU MODULE
COM. MODULE
Technical level
Menu system of parameters
Press an arrow button to activate the main menu. If the default password is in use,
no password is required to change the parameters. If the password protection is in
use, "***" is shown on the display until you give the valid HMI password.
Parameter Menus
2
3
INFO
1MRSxxxxxx x
xxxxxxxx
INFO
1MRSxxxxxx x
xxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
5
6
7
1MRS755770
to view the DNP protocol name.
.
4
Cancel
INFO
xxx
INFO
xxx
8
A051865_2