ABB REU 610 Operator's Manual page 33

1MRS755770
Voltage Protection Relay
Operator's Manual
Switchgroups
The relay contains the following switchgroups:
SGF1 Output contacts
SGF2 Display settings
SGF3, SGF4 Protection functions
SGF5 Latching feature for programmable LEDs
SGB1...SGB5 Digital inputs (DI1...DI5)
SGR1...SGR8 Output contacts (PO1, PO2, PO3, SO1, SO2, SO3, SO4, SO5)
SGL1...SGL8 Programmable LEDs
To set functions via switchgroups:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select the main menu group SETTINGS and the wanted
switchgroup menu (for example SGF), and press
to select the wanted switchgroup (for example SGF2 for display
3. Use or
settings) and press
to select setting group 1 or 2 (GRP1 or GRP2). The active setting
4. Use or
group is indicated by an asterisk "*".
5. Press to enter the setting mode and give the password if required.
6. Use or to select the bit to be set, and
state, see Fig. 4.2.2.2.-4.
7. Press to confirm the selection. After confirmation, the display returns to the
view mode and shows the checksum of the switchgroup.
8. Press to return the display to the idle mode.
.
REU 610 REU 610
.
or to select the wanted bit
33