Adaptive Scale Platter Option - Datalogic Magellan 8400 Quick Reference Manual

EAS-Enabled Systems
NOTE

Adaptive Scale Platter Option

Quick Reference Guide
Electronic Article Surveillance (EAS) systems are aftermarket options,
and are installed by either Sensormatic
at your site depending upon which EAS product package is purchased
to use with your scanner.
Once the system is activated, EAS security tags are automatically deacti-
vated by passing items over the EAS antenna located beneath the scan-
ner's platter.
Some Platters have been shipped with installed spacers on their under-
sides at all four corners. These specially-configured Platters are provided
for customers wishing to add an adaptive scale to their unit at a later
date. Until such time as the adaptive scale is installed, the four spacers
should be left in place to ensure that the Platter rests evenly at its cor-
rect height when positioned on the scanner.
To remove the spacers, loosen and remove the single screw for each as
shown below.
Figure 6. Removing the Platter Adapter Mounts
® ®
or Checkpoint technicians
Spacer
Platter configured for
Adaptive Scale
9