Datalogic Magellan 8400 Quick Reference Manual page 12

LED
INDICATION
Scale (Yellow) LED on steady
a
Scale at Zero
a
Scanner (Green) LED on steady
Scanner Active
and dim
(Normal Mode)
Good Read
Scanner (Green) LED - bright flash
a
Indication
Scanner (Green) LED - Continuous
Program Mode
flashing 1 second on, 1 second off
Indication
Scanner (Green) LED flashes 10
Sleep Mode
mS on, 1990 mS off
Indication
Scanner (Green) LED 100 mS on,
Host Disabled
900 mS off
Audible low error tone 1 second
Field Replace-
able Unit
Green and Yellow LEDs flash
(FRU) Warning
alternately
(Error Mode)
Scanner (Green) LED flashes a
coded sequence in concert with
FRU Indica-
the speaker.
tion
a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled. Your scanner
may not be programmed to display all indications.
6
Table 1. Scanner and Scale Indications
DURATION COMMENT
The scale is at rest and reads zero
weight. The scale is ready to weigh.
The scanner is ready for operation.
Scanning is immediately available.
Indicates a bar code has been read and
decoded.
Indicates the scanner is in Label Pro-
gramming Mode. Cycle power to exit
Programming Mode.
The scanner motor and/or laser have
automatically switched off and the unit
has entered Sleep Mode due to extended
inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has
been detected. Consult the Product Ref-
erence Guide for more details. If a low
tone is heard, but continuous flashing is
not observed, the scanner can still func-
tion in a limited capacity. Call systems
support for service in either case.
Occurs ONLY upon Volume/Tone button
push following an FRU warning indica-
tion. Enables service technicians to
identify FRU failures.
Magellan™ 8300/8400