Grizzly H5527 Owner's Manual page 13

Clearing Jammed
Nails
Always disconnect air from nailer
whenever clearing a jammed nail! A
nailer connected to air may fire acci-
dentally, causing serious personal
injury!
A jammed nail must be cleared before
using the nailer again.
To clear a jammed nail from the
magazine:
1. DISCONNECT NAILER FROM THE
AIR SUPPLY!
2. Unlatch and pull the magazine all the
way back.
3. Remove the nail stick from the
magazine.
H5527 18-Gauge Brad Nailer
4. Open the nailer nose with the nose
release lever (see Figure 6).
Nose Release Lever
Figure 6. Example of nose being opened
to clear a jam.
5. Remove the jammed nail with a tool
that will fit in the slot on the underside
of the nose, such as needle nose pli-
ers.
6. Throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
7. Close the nose cover, and push the
magazine all the way forward until the
catch lever locks it in place.
Nose
Cover
-11
-