Table of Contents
Advertisement
Available languages
Available languages
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
The tables on page 13 indicate the operating mode and DMX value. The LUMIPIX12QIP is equipped with
3-pole XLR connections.
3.10 DMX ADDRESSING
To able to operate the LUMIPIX12QIP with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LUMIPIX12QIP. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels
(example)
4
33
6
33
10
33
DMX Address: 33
DMX512 Controller
LUMiPiX12QiP
DMX Address
Next possible start
occupied
address for unit No. 1
33-36
33-38
33-42
DMX Address: 37
Example 4 DMX channels configuration
Next possible start
address for unit No. 2
37
39
43
DMX Address: 41
Next possible start
address for unit No. 3
41
45
53
DMX Address: 45
Fig.4
11
45
51
63
. . . . . . . . . . . .
Advertisement
Table of Contents
