Temperature Sensor Fail Alarm - Samsung WEC8500 Maintenance Manual

WEC8500/8050 Maintenance Manual
Temperature Sensor Status :
cpu upside sensor
cpu downside sensor
board sensor
Fan Status :
fan[0]
fan[1]
fan[2]
fan[3]
Power Supply Status :
Power Supply[0]
Status
Power Supply[1]
Status
3) If there is no problem with the ambient temperature of the installation site, contact the
Samsung Technical Support Team for checking the system.
1.5.2

Temperature Sensor Fail Alarm

'Temp Sensor Fail Alarm' occurs if the temperature sensor of the system is faulty.
If the temperature sensor remains in faulty state for 24 hours or longer, or if the
temperature sensor and the fan are faulty at the same time, the system is powered off for
system protection.
Symptoms
The following alarms are generated.
*2012-08-28 12:54:46 #system-CRT: Temperature Sensor Fail APC Declare
Temperature sensor is not working. Please contact Samsung Technical
Support.
Possible Causes

The temperature sensor is faulty.

The system temperature cannot be checked due to faulty inter-integrated circuit (I2C).
Solutions
Contact the Samsung Technical Support Team for the countermeasure.
Samsung Electronics America
OK
OK
OK
OK
OK
OK
OK
Equipped
OK
Not Equipped
-
Version 5.1
page 28 of 87