Samsung WEC8500 Maintenance Manual page 13

WEC8500/8050 Maintenance Manual
Possible Causes
During the booting process, kernel image loading is not possible for the following reasons:

Neither the primary (active) partition nor the stand-by partition is detected due to
damaged partition table.

The partition table is normal, but both the primary partition and the stand-by partition
are formatted.

The file system is normal but the kernel is not found within the file system on the
primary partition and the stand-by partition
Solutions
Contact the Samsung Technical Support Team for the countermeasure.
Samsung Electronics America
Version 5.1
page 13 of 87