WEC8500/8050 Maintenance Manual
2) Check the log messages again.
WEC8500# show debug log all
In case of incorrect filter settings, take the following steps.
1) Check the log filter settings.
WEC8500# show debug log conf
---------------------------------------------
Debug Log Configuration
---------------------------------------------
Debug Log Mode
Debug Log Module Filter
Debug Log Level Filter
Debug Log File Size
Debug Log File Count
Module STD Out
Module Filter STD Out
Module Level Filter STD Out
2) Execute the 'debug log level' and 'debug log module' commands to reset the log filter.
WEC8500# debug log level <critical|major|minor|warning>
WEC8500# debug log module <evm|swm|cm|list|NAME>
3) Check the log messages again.
WEC8500# show debug log all
Samsung Electronics America
On
all
warning
10 MBytes
1
Off
all
debug
Version 5.1
page 19 of 87