Other Programming - Panasonic KX-TGK210HK Operating Instructions Manual

M N a MbN: "Yes" a MOKN a M
Note:
R When editing, press the desired dial key to
add digits and press MCN to erase digits.
Erasing all call block numbers
1
M N#217
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
M N a MbN: "Erase All" a MOKN
4
MbN: "Yes" a MOKN
5
MbN: "Yes" a MOKN a M

Other programming

Changing the handset name
The default handset name is "Handset 1" to
"Handset 6". You can customise the name
of each handset ("Bob", "Kitchen", etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 25).
1
M N#104
2
Enter the desired name (10 characters
max.). a MOKN a M
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
M N#105
2
MbN: Select the desired setting. a MOKN
a M N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
N
handsets from dialling any phone number in
that area code.
1
M
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
3
MbN: Select the handsets to be restricted.
a M N
R " " is displayed next to the selected
R To cancel the selected handsets:
N
4
MOKN
5
MbN: Select a memory location. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
2
Enter the current 4-digit base unit PIN
N
(default: "0000").
3
Enter the new 4-digit base unit PIN. a
MOKN
4
MbN: "Yes" a MOKN a M
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Programming
N#256
authorised service centre.
handset numbers.
MbN: Select the handset. a Press M N
again. " " disappears.
N
N#132
N
25