Table of Contents
Advertisement
Programming
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1
MMENUN#240
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
Setting the first ring for the call
block list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to "Off". The default setting is "On".
1
MMENUN#173
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call
block numbers
1
MMENUN#217
2
MbN: "Block a single number" or
"Block range of numbers" a
MSELECTN
3
MbN: Select the desired entry.
R To exit, press MOFFN.
4
To edit a number:
MEDITN a Edit the number. a MSAVEN
a MOFFN
To erase a number:
MERASEN a MbN: "Yes" a MSELECTN
a MOFFN
Note:
R When editing, press the desired dial key to
add, MCLEARN to erase.
46
TGE26x_27xC(en)_1224_ver012.pdf
Erasing all call block numbers
1
MMENUN#217
2
MbN: "Block a single number" or
"Block range of numbers" a
MSELECTN
3
MMENUN a MbN: "Erase all" a
MSELECTN
4
MbN: "Yes" a MSELECTN
5
MbN: "Yes" a MSELECTN a MOFFN
Other programming
Changing the handset name
The default handset name is "Handset 1" to
"Handset 6". You can customize the name
of each handset ("Bob", "Kitchen", etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 46).
1
MMENUN#104
2
Enter the desired name (10 characters
max.).
3
MSAVEN a MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
MMENUN#105
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
46
2013/12/24
15:43:31
Advertisement
Table of Contents
