Detailed Command Description Reference; Table 3.2 Intelligent Pressure Scanner Commands - Pressure Systems 9022 User Manual

Pressure Systems, Inc.

3.2 Detailed Command Description Reference

All commands applicable to the various models of the NetScanner
Scanner modules are described on the following pages. They are summarized in the following
table. For convenience, this table is also repeated in Appendix B.
Type
TCP/IP
UDP/IP
Broadcast
NetScanner™ System (9016, 9021, & 9022) User's Manual
Table 3.2
Intelligent Pressure Scanner Commands
Command id
A Power-Up Clear
B Reset
Configure/Control Multi-Point Calibration (4
C
sub-commands)
Read Transducer Voltages
V
Z Calculate and Set Gains (Span Cal)
Read Transducer Raw A/D Counts
a
b Acquire High Speed Data
c Define/Control Autonomous Host Streams (6
sub-commands)
h Calculate and Set Offsets (Re-zero Cal)
Read Temperature A/D Counts
m
n Read Temperature Voltage
q Read Module Status
Read High Precision Data
r
t Read Transducer Temperature
Read Internal Coefficients
u
v Download Internal Coefficients
Set/Do Operating Options/Functions
w
psi9000 Query Network
Reboot Specified Module
psireboot
psirarp Change Specified Module's IP Address
Resolution Method (then Reboot)
3 - 13
™
System Intelligent Pressure
Command Function
www.PressureSystems.com