Chapter 2 - Installation And Set Up; Unpacking And Inspection; Safety Considerations - Pressure Systems 9022 User Manual

Pressure Systems, Inc.
Installation and Set Up
2.1

Unpacking and Inspection

™
The NetScanner System product family has many components which may be purchased either as
an entire system, or as individual pieces of equipment. Before assembling the system, use the
shipping bill as a reference to ensure that all parts have arrived.
responsibility for equipment that is damaged during shipment. If containers are broken, ripped, or
damaged, contact the transportation carrier. If the equipment itself appears to be damaged, contact
the Repair Department at Pressure Systems.
™
Each NetScanner
minimum components:
!
Model 9016 or 9021/9022 Intelligent Pressure Scanner module
!
Start-up software diskette(s) or CD-ROM
! ™
NetScanner
9016/9021/9022) (Hard copy and/or CD-ROM)
2.2

Safety Considerations

Always wear safety glasses when operating this equipment or when working with pressurized lines.
Always ensure that high pressure lines are properly secured and that all pneumatic lines are rated for
the proper pressure and temperature environments.
All system power should be OFF during installation (or removal) of any components in a
™
NetScanner System module. Failure to turn power OFF prior to installation may cause permanent
damage to the module. Use caution and check line voltages before applying power to the module.
System Intelligent Pressure Scanner shipment will contain the following
System User's Manual for Intelligent Pressure Scanners (Models
NetScanner™ System (9016, 9021, & 9022) User's Manual
2 - 1
Chapter 2
Pressure Systems takes no
www.PressureSystems.com