Other Functions - Pressure Systems 9022 User Manual

Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User's Manual

3.1.4.6 Other Functions

Some commands may be used at any time to obtain information about the internal setup and status
of a module. The Read Module Status ('q') command is an example. Also, the Set/Do Operating
Options ('w') command, though generally used after power-up reset, may also be used at other
times to change system operation. The actual feedback position status of internal valves, and several
temperature status conditions may be configured to be periodically delivered to the host
automatically in any of the three autonomous streams configured by the 'c' command.
3 - 12
www.PressureSystems.com