Diagnostic Port Hookup; Pressure Connections; Table 2.1 Diagnostic Port Wiring - Pressure Systems 9022 User Manual

Pressure Systems, Inc.

Diagnostic Port Hookup

2.3.5
™
Each NetScanner System module contains a Diagnostic Port that supports diagnostic and
operational functions. The Diagnostic Port has only a simple RS-232 asynchronous serial interface.
The connections are made via certain pins of its common circular connector. Cable connection
should be made according to Table 2.1.
NetScanner
System
Diagnostic Port
Connector
GND
Tx
Rx
The RS-232 interface is capable of supporting simple asynchronous communications with fixed
parameters of 9600 baud, no parity, 8 data bits, and 1 stop bit. Only communication cable lengths
less than 30 feet (10 m) are recommended.
The 9016, 9021 and 9022 use the diagnostic interface for optional configuration and diagnostic
purposes only. The diagnostic port functions on the 9016, 9021, and 9022 are generally not required
by the end user. Standard cables for these modules do not include diagnostic port connections.
2.3.6

Pressure Connections

All pneumatic connections to Model 9016 are found on the instrument top panel. The function of
each input port is clearly engraved or printed next to each input. Connections are through bulge
tubing, compression fittings or special user-supplied fittings on the tubing plate. All pneumatic
inputs to these modules should contain dry, non-corrosive gas only. For Model 9021/9022, all
pneumatic or hydraulic connections are to the individual 9400, 9401, or 9402 (or third party) all-
media transducers mounted externally from the module itself.
All 9016 standard Intelligent Pressure Scanners are supplied with the purge/leak check calibration
manifold. Through software commands, this valve may be placed in one of four positions; RUN,
CAL, PURGE, or LEAK-CHARGE. Pneumatic input requirements for these four operating
positions are described in the following sections.
NetScanner™ System (9016, 9021, & 9022) User's Manual
Diagnostic Port Wiring
™
Table 2.1
2 - 7
www.PressureSystems.com