Network Query - Pressure Systems 9022 User Manual

Pressure Systems, Inc.
NETWORK QUERY (UDP/IP Command 'psi9000')
Purpose: To determine how many (and which) modules are powered-up and operational on
the network.
Description: When a module receives this broadcast command (by continuously monitoring port
7000) it responds with a broadcast (on port 7001) with an ASCII response
containing comma-separated parameters. These are listed in the following table:
ipadr
ethadr
sernum
mtype
sfwver
connst
ipadrst
lisport
subnet
iparpst
udpast
pwrst
Command
Response
Parameter
IP address
Ethernet address
Serial number
Module type (e.g., 9016)
Software version (e.g., x.xx decimal format)
Connection status (1=connected, 0=available)
IP address status (1=has one, 0=waiting for server)
IP listening port for connections (default=9000)
Subnet mask
IP address resolution status (1=uses RARP/BOOTP
server, 0=uses static IP address stored internally)
UDP auto status (1=broadcasts this response
automatically after connection possible, 0=only sends
response for "psi9000" UDP/IP command.
Power-up status (same as a 'q02' command response)
NetScanner™ System (9016, 9021, & 9022) User's Manual
"psi9000"
"ipadr, ethadr, sernum, mtype,
sfwver, connst, ipadrst, lisport,
subnet, iparpst, udpast, pwrst,"
Meaning
3 - 75
www.PressureSystems.com