Upgrading And Provisioning - Grandstream Networks GWN7600LR User Manual

Upgrading Firmware
The GWN7600LR can be upgraded to a new firmware version remotely or locally. This section describes
how to upgrade your GWN7600LR.
Upgrading via Web GUI
The GWN7600LR can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
192.168.5.87
The upgrading configuration can be accessed via Web GUI->System Settings->Maintenance ->
Upgrade.
Upgrade Via
Firmware Server
Check Update on Boot
Automatic Upgrade check
interval(m)
Upgrade Now
Upgrading Slave Access Points.
When the GWN7600LR is being paired as slave using another GWN7600LR acting as Master Access
Point Controller, users can upgrade their paired access points from the GWN7600LR acting as Master
Access Point Controller.

UPGRADING AND PROVISIONING

Table 16: Network Upgrade Configuration
Allow users to choose the firmware upgrade method: TFTP, HTTP
or HTTPS.
Define the server path for the firmware server.
Allows the device to check if there is a firmware from the configured
firmware server at boot.
Set the value for automatic upgrade check in minutes.
Click on
device will reboot after downloading the firmware.
GWN7600LR User Manual
button to begin the upgrade. Note that the
P a g e | 54