Capture
This section is used to generate packet trace captures from network groups interfaces which will help to
sniff packets within the network group for troubleshooting purpose or monitoring...Users will need to plug a
USB device to the USB port on the back of the GWN7600LR.
To access Capture page, go to System Settings->Debug->Capture.
The below table will show different fields used on debug page
Required Options
File Name
Enter the name of the capture file that will be generated.
Interface
Choose a network group as Interface on which the traffic will be captured.
Device
Choose a device plugged to USB port to save the capture once started.
Advanced Options
File Size
Set a File size that the capture will not exceed.
Rotate Count
Set a value for rotating captures.
Choose if you want to get all traffic or only outgoing or incoming to the chosen
Direction
interface.
Figure 35: Capture page
Table 14: Debug
GWN7600LR User Manual
P a g e
|
49