Debug; Capture (Gwn7610/Gwn7600 Only) - Grandstream Networks GWN76 Series User Manual

Hour of the day
Day of the week
Devices
Enable Logserver
After setting up the Logserver and saving the settings, users need to connect an USB external storage
and press Start button to start collecting logs.
All log messages from all devices will be put on one single file, and the router will keep rotating and creating
new files based on the configured rotation policy.
•
Under Syslog File List, users can select a device and press List button to list all saved logs on
this device.
•
Press Download button to download a saved log.
•
Press Clear button to remove logs.

Debug

GWN76XX offers many features for managing and monitoring connected clients to SSIDs, as well as
debugging and troubleshooting.

Capture (GWN7610/GWN7600 Only)

This section is used to generate packet trace captures from SSIDs interfaces which will help to sniff
packets within the SSID for troubleshooting purpose or monitoring. Users will need to plug a USB device
to the USB port on the back of the GWN7610/GWN7600. To access Capture page, go to System
Settings→Debug→Capture.
Enter the hour of day at which trigger file rotation.
Enter Day of the week + hour of day, at which trigger file rotation.
Select the path (a USB partition) to store collected logs. Required.
Enables the Logserver.
GWN76XX User Manual
Version 1.0.15.20
P a g e | 97