Imageformatcontrol - Dahua A5A21M/CG9 User Manual

Parameter
DeviceTLVersionMajor
DeviceTLVersionMinor
DeviceMaxThroughput
DeviceCharacterSet
DeviceReset
DeviceTemperatureSelector
DeviceTemperature
DeviceRegisterIsBigEndian
DeviceTLVersionSelector
5.2

ImageFormatControl

In this property, you can change image size, image pixel format, region of interest(ROI) and test image
mode etc., as shown in Figure 5-2; please refer to Sheet 5-3 for more details about parameter settings.
The image output formats supported by the industrial camera are shown in Sheet 1-2. Specific supported
formats are subject to the formats supported by the camera.
Explanation
to GigE Vision protocol. This column can automatically
recognize the protocol that comes with the camera, which can't
be changed.
The major version of the transport layer protocol that the
device is compatible with.
The minor version of the transport layer protocol that the
device is compatible with.
Maximum bandwidth of the data that can be streamed out of
the device.
Character set used by the strings of the device's bootstrap
registers. The default is UTF8.
Device reset button which can restart the camera by calling
API.
Select to view the temperature of sensor board / mainboard.
The actual temperature of sensor board / mainboard
Endian of the registers of the device: big-endian / little-endian.
The default is big-endian.
Select the compatible version of the device transport layer.
The GigE camera supports switching between V2.0 and V1.0.
(℃) .
27