Imageformatcontrol - Dahua 3000 Series User Manual

Parameter
DeviceSFNCVersionMinor
DeviceLinkThroughputLimitMode
DeviceLinkThroughputLimit
DeviceReset
DeviceTemperatureSelector
DeviceTemperature
DeviceUSBMode
5.2

ImageFormatControl

In this property, you can change image size, image pixel format, region of interest(ROI) and test image
mode etc., as shown in Figure 5-2; please refer to Sheet 5-3 for more details about parameter settings.
Please refer to 1.4 Main Technical Parameters for the image output formats supported by the industrial
camera. Specific supported formats are subject to the formats supported by the camera.
Explanation
The minor version of SFNV supported by the device.
Enables the bandwidth limit function.
The value of bandwidth limit.
Device reset button which can restart the camera by calling API.
Select to view the temperature of sensor board / mainboard.
The actual temperature of sensor board / mainboard
The current connected USB mode, such as USB3.0.
Figure 5-2 Image Format Control
(℃) .
Main Function Description
36