Configuring Ip Address - Planet SGS-5220-24T2X Quick Installation Manual

L2+ 24-port gigabit + 2-port 10g sfp+ stackable managed switch
Hide thumbs Also See for SGS-5220-24T2X:
Table of Contents

Advertisement

5. Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
 Show the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address as shown in Figure 5-1.
 Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 5-2.
SGS-5220-24T2X# configure terminal
SGS-5220-24T2X(config)# interface vlan 1
SGS-5220-24T2X(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
Figure 5-1: IP Information Screen
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgs-5220-24s2xSgs-5220-24p2x

Table of Contents