Table of Contents
Advertisement
The previous command would apply the following settings for the Stackable
Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
4. Repeat step 1 to check if the IP address is changed.
Store current switch configuration
5. At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 5-3: Saving Current Configuration Command Screen
If the IP is successfully configured, the Stackable Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the
Managed Switch through the new IP address.
If you are not familiar with the console command or the related
parameter, enter "help" anytime in console to get the help
description.
Note
8
Figure 5-2: Configuring IP Address Screen
Advertisement
Table of Contents
