Valve Latch - Signode AMPT-12 Operation, Parts And Safe

OPERATING INSTRUCTIONS
1. Encircle the package with strap and insert
the bottom end under feedwheel so that it
extends at least 1/2" (12mm) beyond the
gripper plug. Depress the gripper trigger to
actuate the strap gripper.
2. Insert the top strap between the feedwheel
and the gripper plug and insert it into the slot
of the strap latch. Pull excess slack from the
strap. Make sure you are not standing in line
with the strap and press the tensioner lever
all the way down. It will lock in place. The
feedwheel will engage automatically and the
tool will begin tensioning. Should it become
necessary to stop the tensioning cycle, press
the valve latch forward.
NOTE: The feedwheel can be lowered manually, without starting the motor, by pressing the
motor latch. To start the motor, press the tensioner lever.
9