Test Operation - Fujitsu UTB-YCA Setting Manual

Turn on power
3-2-5.

Test operation

ACL
CLOCK
ADJUST
DAY
TIMER
MODE
TIMER DAY OFF
COPY
Remote control group operation settings are performed in the control mode. The following proce-
dure for the setting is the same for any of the control modes: Individual control mode / Group control
mode / All control group.
Push
dividual control mode / Group control mode / All con-
trol.
• When Individual control mode is selected, use
and
trol number, then go to step 3.
• When Group control mode is selected use
to select the desired group number, then go to step
3.
• When All control mode is selected, go directly to
step 3.
Press
TEST
setting selected in 1 is applied to the selected con-
trol mode.
28
Initial setting Clock setting
TIME
TIMER MEMORY CENTRAL
DELETE OPERATION CONTROL
TIMER MEMORY GROUP
SET SETTING SETTING
to select control mode from among In-
to select the desired central con-
and will light up. The operation
Group information store
ENERGY
BACK
ZONE
SAVE
SET
FILTER
ON OFF
RESET
DELETE
CHECK TEST
Test operation
MASTER
CONTROL
FAN
TEMP .
ANTI
CONTROL
FREEZE