Available'manuals - Control Data Corporation CDC 790ICEM Owner's Manual

C-'
l)
AVAILABLE MANUALS
The following manuals are available for the CDC 790 ICEM
Ergonomic Workstation:
CUSTOMER PLANNING GUIDE - Publication number 62950147
Tells how to prepare the site for installation of the
workstation and the communications interfaces.
SOFTWARE REFERENCE MANUAL - Publication number 62950148
Provides information for writing programs for the
workstation. This manual is intended -for programmers.
TEKTRONIX EMULATION -Publication number 62950166
Explains the differences between Tektronix on the 4115 and
TEKEM on the 790.
WORKSTATION, ON-SITE HARDWARE MAINTENANCE MANUAL - Publication
number 62950149
Tells how to install and maintain the workstation.
WORKSTATION COMMUNICATIONS INTERFACES, ON-SITE HARDWARE
MAINTENANCE MANUAL - 62950153
Tells how to install and maintain the communications
interfaces.
Copies of this Owner's Guide and of the preceding manuals are
available from:
62950150
Control Data Corporation
Literature and Distribution Services
308 North Dale Street
St. Paul, Minnesota 55103
E
E-1
.......
__
._-_._-_
.....
_ . _ . _ - - - - - - - - - -
.....
_ . -
..
_
....
__
. _ - - - - - - - -