Control Data Corporation CDC 790ICEM Owner's Manual page 35

Ergonomic workstation
Table of Contents

Advertisement

C)
o
Error messages relating to the communications line between
the workstation and the host computer - See information
supplied by the network.
Error messages from the host computer relating to the
application program - See manuals supplied by the
application program.
THE COLOR DISPLAY WILL NOT COME ON
1.
Check that the COLOR BRIGHTNESS-control is turned up
(clockwise).
2.
Check that the COLOR MONITOR CB circuit breaker is pressed in
to the ON position.
COLORS ARE CONTAMINATED WITH OTHER COLORS
1.
Press the COLOR DEGAUSS switch, located under the text
display, to the ON position to purify the colors.
YOU CANNOT CONNECT THE WORKSTATION TO THE REMOTE (HOST) COMPUTER
1.
The remote computer may be out of service.
Check by calling
the computer site or the application-program hotline.
2.
If your system uses a modem, the modem may not be turned ON
or the modem may be set up wrong.
See the modem· manual.
THE TABLET DOES NOT WORK RIGHT
1.
Press the RESET switch on the back edge of the tablet and try
using the tablet again.
THE TABLE WILL NOT MOVE AND THE DISPLAY ENCLOSURE WILL NOT TILT
1.
Check that the MOTOR CB circuit breaker is pressed in to the
ON position.
62950150
5-3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDC 790ICEM and is the answer not in the manual?

Table of Contents