Control Data Corporation CDC 790ICEM Owner's Manual page 11

7) At the top of the display cover is an anti-glare hood, which
when extended, will minimize glare on the display screens
from overhead lights. When overhead lights are not a
problem, the hood may be pushed in toward the display cover.
OS480-6
8) The height of your workstation chair seat, the tilt of the
front of the seat, and the rigidity of the chair back support
are adjustable.
-
When sitting in the chair, adjust the height of the chair
seat by pressing on the height control. Slide the seat
support control sideways to change the tilt of the front of
the seat. Press on the back half of the back support control
to keep the back support rigid; press on the front half of
the back support control to allow the back support to flex;
turn the tension control to adjust the flexing tension of the
back.
OSSII
62950150
- - - - - - - - _ .
---_
..
_
..
-_
......
_
.................
_---_.-
TENSION
CONTROL
----;X
BACK SUPPORT
CONTROL
SEAT SUPPORT
CONTROL
1-5
.....
-
. .
--
..
- - - - - - - - - - -