First Use Each Day (Tank And Boiler Empty) - Smeg CWC 611 User Manual

4. That the filters are in place, the spray arms rotate, and there are no foreign bodies in the dishwasher.
5. Switch on the master switch (user): the decimal points of both digits appear on the display.

8.3 First use each day (tank and boiler empty)

Display shows
CWC 611
Actions and what happens
Door closed and master switch on ON:
Press and hold it down for 2/3 seconds; the ON/OF Led and the two
digits on the display light up.
With the door closed, filling of the tank begins. The word "FILL" scrolls
across the display and the Led on will be that of the latest program set.
The display shows "End" when the tank is full.
Load the dishes and close the door.
Select the program required by holding down one of the three buttons
required for about 2"; the Led of the program flashes.
While washing is in progress the display shows the water temperature in
the tank. During rinsing, it shows the boiler temperature.
At the end of the program the program Led comes on and "End" scrolls
across the display
15