Before Washing - Smeg CWC 611 User Manual

Using the buttons
Button Short press
Display of temperatures in
Boiler (L3) and tank (L1)
Set P0

8.2 Before washing

Use only detergents and rinse aids for industrial dishwashers. Do not use detergents intended for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
When topping up the tanks, take care not to swap the products; this might damage the dishwasher and cause
malfunctions.
Do not mix different detergents; this would damage the dispenser device. Failure to comply with this recommendation
leads to forfeiture of the warranty entitlement on the appliance's water system.
Industrial dishwasher detergents may cause serious irritation. Comply carefully with the instructions provided by the
detergent producer on the pack.
Check
1. Turn on the mains water tap (user)
2. The level of detergent and rinse aid in the containers.
3. That there is regenerating salt in the relative container (if fitted).
CWC 611
Pressed for 2"
On/OF
Start Regeneration
Start Short Programme
Start Medium
Programme
Start Long Programme
14
Pressed for 5"
Start Pump-out
Start programme P0: emptying of tank to clean filters.
Switch off and back on to allow reuse.