Machine Maintenance
Registration
Follow the procedure below to adjust where to start printing on
fabric after checking the test pattern printed.
Load the print media in the cassette. Align the print
media with the corners of the table.
Pressthe[▼/Menu]key.
Press the [▲] or [▼/Menu] key to display [Mainte-
nance], and then press the [#Enter] key.
Press the [▲] or [▼/Menu] key to display [Registra-
tion], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytodisplay[Pr.TestPat-
tern], and then press the [#Enter] key.
Press the [Start] key.
A test pattern to adjust the print start position is printed.
Check the optimal adjustment values on the printed test pattern.
Fold the test pattern sheet in
5
half lengthwise.
52
CFT069