Printing on Fabric
Printing
•
Do not touch the cassette or put your hand in the machine while
printing is performed.
•
Do not open the top cover while printing is performed. Printing is for-
cibly interrupted and cannot be resumed.
•
When a garment misfeed error appears, see "Adjusting the Height of
the Cassette" in "The Cassette Does Not Operate Correctly" in "Trou-
bleshooting", Operating Instructions.
•
Do not print if no fabric is loaded on the cassette. It may cause the
ink to stick to the cassette. After printing without loading a fabric in
the cassette, do the following:
■ S olutions if Printing Was Performed Without a Fabric Loaded in
the Cassette
• A4 standard tray or A5 tray:
Wipe the cassette with a dry cloth.
Do not use tissue paper because it makes the cassette dirty.
Use polythene gloves to avoid touching the ink directly.
Do not use chemicals such as thinner or ethanol.
Dry the remaining ink using the optional finisher or an
iron.
Stains might remain on the cassette, which can still be used
however.
When using the optional finisher, use it in dry mode.
When ironing, lay down a sheet of paper on the surface of
the cassette, and apply the iron to the paper.
After drying the ink, rub the surface of the cassette with a
cloth to check whether or not the ink is dry. If ink does not
stick to the cloth, the ink has dried completely.
2
23