Ricoh Ri 100 User Manual page 36

Error Messages
Press Tray key
Prepare new Ink Collector
Unit
Replace Ink: ### / Press
Start key for Force Print
###: Cyan, Magenta, Yellow,
Black
Right Front Cover is open /
Close Right Front Cover
Routine Maint. Required
SCXXX-XX Power Off On /
Call Service if error reoccurs
Set Tray
3
Size Mismatch
Tray to print or Stop to reset
Top Cover open close it to /
restart machine / Power Off
On
Waiting...
How to troubleshoot the other error messages
For details, see "Error & Status Messages on the Display" in "Troubleshooting", Op-
erating Instructions.
36
Troubleshooting
The cassette is not loaded correctly. Detach the
cassette, and then load it again.
The ink collector unit is almost full.
Make sure you have a new ink collector on hand.
The ink (cyan, magenta, yellow, black) will soon run
out. If you continue printing, press the [Start] key.
Because the specified print setting (garment type,
print quality, thickness) uses a large volume of ink,
it may run out while you are printing. Prepare the
ink cartridge soon.
The right front cover is open. Close the right front
cover.
Regular maintenance is needed. Clean both the
Maintenance Unit and the print head nozzles.
An error has occurred. Turn the machine off and
then on.
If the message reappears, contact your sales or
service representative.
The cassette is not loaded. Load the cassette on
the cassette stand.
The cassette of the specified size is not set.
Change the print size. To continue printing without
size mismatch, press the [Tray] key.
The top cover is open. Close the top cover.
Wait a moment. You might hear a clicking sound
while the print heads are being filled. This is not a
malfunction.