Location And Description Of Warning Labels; Safety Warning Labels - Honeywell Touchpoint Plus User Manual

2.2 Location and Description of Warning Labels

2.2.1 Safety Warning Labels

In accordance with the requirements of European Standard EN 60825–1, appropriate warning labels are mounted in
specified locations on the equipment. This is to indicate conditions under which the user could be subjected to electrical
hazards.
Figure 1. Quick Start Guide Label
Figure 3. Protective Earth (Ground) Point
This Protective Earth (Ground) location point label is
used inside the system and is not normally visible to
the operator.
MAN0996_Iss 1_02/16
Pt. No. 3011M5044_EN
Safety
(Not to Scale)
Figure 5. Internal Label Positions
Figure 2. Rating Label
(External – Not Shown Below)
Figure 4. Equipment Earth (Ground) Point
This Equipment Earth (Ground) location point label is
used inside the system and is not normally visible to
the operator.
8
Touchpoint Plus
User Guide