Installing The Display Assembly; Display Bezel - Dell Latitude 5590 Owner's Manual

Installing the display assembly

1 Place the display assembly to align with the screw holders on the laptop.
2 Tighten the M2.0x5.0 screws to secure the display assembly to the laptop.
3 Turn over the laptop.
4 Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
5 Connect the antenna cables and display cable to the connectors.
6 Place the display cable bracket over the connector and tighten the M2.0x5.0 screws to secure the display cable to the laptop.
7 Install the:
a hinge cap
b WWAN
c WLAN card
d battery
e base cover
8 Follow the procedure in

Display bezel

Removing display bezel
1 Follow the procedure in
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN
e display assembly
3 To remove the display bezel:
a Pry the display bezel at the base of the display [1].
b Lift the display bezel to release it [2].
c Pry the edges on the side of the display to release the display bezel [3, 4,5].
CAUTION:
adhesive is very strong and tends to stay stuck to the LCD portion and can peel the layers up or crack the glass when
trying to pry the two items apart.
After working inside your
Before working inside your
The adhesive used on the LCD bezel to seal it with the LCD itself, makes it hard to remove the bezel as the
computer.
computer.
Removing and installing components 47