Installing the chassis frame
1
Place the chassis frame on the computer and tighten the screws (M2x5, M2.0x3.0).
NOTE:
When reinstalling the chassis frame ensure the keyboard cables are NOT under the frame, but run through the
opening in the frame.
2
Connect the speaker, keyboard cable, touchpad cable, pointstick cable and backlight cable(optional).
3
Route the WLAN and WWAN cable.
NOTE:
Ensure the coin cell battery cable is properly routed in between the chassis frame and the system board to avoid
damages to the cable.
4
Install the:
a
SSD card
b
WWAN card
c
WLAN card
d
battery
e
base cover
f
SIM card module
5
Follow the procedure in
System board
Removing the system board
1
Follow the procedure in
2
Remove the:
32
Removing and installing components
After working inside your
system.
Before working inside your
computer.