Chassis Frame; Installing The Power Connector Port - Dell Latitude 5590 Owner's Manual

Installing the power connector port

1 Insert the power connector port into the slot on the laptop.
2 Place the metal bracket on the power connector port.
3 Tighten the M2.0x3.0 screw to secure the metal bracket to the power connector port on the laptop.
4 Connect the power connector port cable to the connector on the system board.
5 Install the:
a battery
b base cover
6 Follow the procedure in

Chassis frame

Removing the chassis frame
1 Follow the procedure in
2 Remove the:
a SIM card module
b base cover
c battery
d WLAN card
e WWAN card
30 Removing and installing components
After working inside your computer.
Before working inside your computer.